Kirby 37 User Manual

117

Kirby Morgan 37 & 57

3) Install the sealing o-ring and regulator mount nut.

Do not tighten the nut at this time.

4) Tighten the screws that connect the exhaust main

body to the quad exhaust cover.

5) Install the oral nasal mask per this chapter.

6) Install the nose block device per chapter 8.

7) Install the bent tube assembly, per this chapter.

8) Tighten the regulator mount nut to 75 inch

pounds.

9) Install the screws, kidney plates and whisker spac-

ers from the whiskers. Tighten the screws to 12 inch

pounds.

Tighten the screws that connect the quad exhaust

cover to the exhaust body.

Connect the bent tube assembly and tighten at both

ends.

Tighten the screws that fasten the whiskers to the

helmet.