Konica Minolta Spot Mask II User Manual

INSERTING THE HOLDER INTO THE SCANNER

EJECTING

1. Press the power switch to turn

the scanner on. Turn on your
computer, then launch the
Dimâge Scan Multi II software.

• The green indicator lamp will blink

slowly while the scanner is setting up.

2. Insert the holder into the

scanner in the direction
indicated by the white arrow
on top of the holder.

• Do not insert the holder at an angle.

3. Gently push the holder into

the scanner until the raised

insertion mark

is aligned

with the film-slot door.

• The film holder will be automatically

guided in past the

mark.

• If the holder is not loaded correctly,

then eject and reinsert it.

1. Press the eject button on the

front of the scanner.

• The holder will automatically eject

partway, then stop.

2. Remove the holder.

• Wait for the Indicator lamp to turn off

before removing the holder.

• The holder should pull out easily.