Konica Minolta Spot Mask II User Manual
33
INDICATOR LAMP
The indicator lamp on the front of the scanner reveals the status of the scanner.
Indicator Lamp
Scanner Status
Off
Set up is complete and there is no holder
inserted in the scanner.
inserted in the scanner.
Green – blinking slowly
Scanner is busy:
• setting up (initializing).
• index scanning, prescanning, or scanning.
• autofocus, point AF, manual focus.
Green – blinking quickly
If using a film holder, the scanner is busy:
• loading the film holder.
• transporting the film holder.
• ejecting the film holder.
• transporting the film holder.
• ejecting the film holder.
If using the APS Adapter, the scanner is busy:
• rewinding the film in the APS adapter.
• transporting the adapter.
• transporting the adapter.
Green – glows steadily
There is a film holder in the scanner. The
scanner is not busy.
scanner is not busy.
Red – glows steadily
There is a problem with the accessory panel.
If using a film holder:
The accessory panel is open. Close the
accessory panel.
accessory panel.
If using the APS adapter:
The accessory panel is not fully open.
Open it all the way and push it until it clicks.
Open it all the way and push it until it clicks.
Red – blinks quickly
The fluorescent lamp unit cover is not fully
closed.
closed.
or
The fluorescent lamp is burnt out.
The fluorescent lamp is burnt out.
or
There is a hardware malfunction. Contact a
Minolta Service facility.
There is a hardware malfunction. Contact a
Minolta Service facility.