Kicker 2012 Front Row 6-Channel DSP (12ZXDSP1) Owner's Manual
2
Front Row Digital Signal Processor
Owner’s Manual
Owner’s Manual
PERFORMANCE
Authorized KICKER Dealer:
Purchase Date:
Serial Number:
Operating Voltage
DC 10–16V
Fuse
2A
Remote Out Current Capacity
100mA
DSP Specifi cations
50MHz ZX CPU
28/56-bit double-precision DSP
28/56-bit double-precision DSP
Signal-to-Noise Ratio
110dB (ref. 4V)
Frequency Response ± 0.2dB
10Hz–22KHz
A/D-D/A Converters
24-Bit
THD+N
0.004%
Input Sensitivity
300mV-10V
Electronic Crossovers | 32-Step
Precision with Analog Control |
Selectable Slope of 12dB, 24dB,
or 48dB per Octave
Precision with Analog Control |
Selectable Slope of 12dB, 24dB,
or 48dB per Octave
FRONT: Variable HI-PASS, 10–5kHz
REAR/SURROUND: Variable HI-PASS, 10–500Hz
REAR/SURROUND: Variable LO-PASS, 50–5kHz
SUB: Variable LO-PASS, 40–160Hz
REAR/SURROUND: Variable HI-PASS, 10–500Hz
REAR/SURROUND: Variable LO-PASS, 50–5kHz
SUB: Variable LO-PASS, 40–160Hz
Subsonic Filter
Variable, 10–80Hz @ 48dB/Octave
Subwoofer Phase Control
Variable, 0–180°
KickEQ™
Variable, 0–15dB @ 45Hz
SHOCwave™
Variable Bass Restoration 0–12dB, 1 Octave Below Fundamental
Width
7-1/32” (178.5mm)
Depth
7-23/32” (196mm)
Height
1-19/23” (40.6mm)
Congratulations on purchasing the KICKER Front Row! The heart of your Front Row DSP processor is a
combination of state-of-the-art digital signal processing and user friendly analog controls that give you easy,
fl exible, and precise control of the audio in your car. The soul of your Front Row lies in the precision-designed,
user-adjustable features that transform your car into a studio and put you right there, Front Row, with your favorite
music! You are going to love how your music sounds with heart and soul.
combination of state-of-the-art digital signal processing and user friendly analog controls that give you easy,
fl exible, and precise control of the audio in your car. The soul of your Front Row lies in the precision-designed,
user-adjustable features that transform your car into a studio and put you right there, Front Row, with your favorite
music! You are going to love how your music sounds with heart and soul.
INSTALLATION
Mounting: Choose a structurally sound location to mount your KICKER Front Row. Make sure there are no
items behind the area where the screws will be driven. Choose a location that allows at least 4” (10cm) of open
ventilation for the device. If possible, mount the Front Row in the climate-controlled passenger compartment. Drill
four holes using a 7/64” (3mm) bit and use the supplied #8 screws to mount the Front Row.
items behind the area where the screws will be driven. Choose a location that allows at least 4” (10cm) of open
ventilation for the device. If possible, mount the Front Row in the climate-controlled passenger compartment. Drill
four holes using a 7/64” (3mm) bit and use the supplied #8 screws to mount the Front Row.
Wiring: Disconnect the vehicle’s battery to avoid an electrical short. Then, connect the ground wire to the Front
Row. Make the ground wire short, 24” (60cm) or less, and connect it to a paint-and-corrosion-free, solid, metal
area of the vehicle’s chassis.
Row. Make the ground wire short, 24” (60cm) or less, and connect it to a paint-and-corrosion-free, solid, metal
area of the vehicle’s chassis.
2012 FrontRow (ZXDSP) Rev G.indd 2
2012 FrontRow (ZXDSP) Rev G.indd 2
4/30/2012 1:55:45 PM
4/30/2012 1:55:45 PM