Kenwood KVT-920DVD User Manual

chapters/tracks forwards.

Fast Forwarding Disc Play
Hold down on the 

¢ button.

Release your finger to play the disc at that point.

Reversing Disc Play
Hold down on the 

4 button.

Release your finger to play the disc at the point.

Press the EJECT button.
The disc stops playing and ejects from the slot.

When you load a disc and eject it right away, the
next time you try to insert the disc may not load.
In such a situation, take the disc out for a
moment and then reinsert it.

Press the 

5 button to increase the volume.

Press the 

∞ button to decrease the volume.

Press the ATT button to switch the attenuator on
and off.
When the attenuator is on, the ATT indicator is
displayed.
When the attenuator is off, the volume returns to
the original level.

Turning the volume up, or turning it all the way
down deactivates the attenuator function.

Each time you press the SOURCE button to
switch source mode.

Holding the disc with the labelled side facing up, insert
it in the disc slot. The disc will start playing.

• Do not insert other disks when a disk is already

inserted.It may damage the disk.

• When inserting a disc, be careful that the disc

does not touch the bottom of the monitor or the
mechanism.  If it does, it may be scratched.

• Do not attempt to insert a disc into the slot if

another one is already there. 

• The unit can only play 12-cm (5-inch) CDs. If you

insert an 8-cm (3-inch) CD, it will get stuck inside
and can cause the unit to malfunction.

In Tuner Mode
Press the 

4 button to make decreasing seeks.

Press the 

¢ button to make increasing seeks.

In Disc Mode
Press the 

4 button to search through the

chapters/tracks backwards.
Press the 

¢ button to search through the

2CAUTION

Disc Slot