Kenwood KVT-920DVD User Manual
29
Station Preset Memory
Store the frequency of the station currently
being listened to. You can then recall that
station with a single touch of a button.
being listened to. You can then recall that
station with a single touch of a button.
Select the band/station that you want to have
stored.
stored.
Hold down preset station number [ 1 ] - [ 6 ]
that you want to use for the station, for two
seconds or more.
that you want to use for the station, for two
seconds or more.
You can store 6 stations in each of the FM1,
FM2, FM3, and AM(MW/LW) band.
FM2, FM3, and AM(MW/LW) band.
Auto Memory Entry
You can automatically store all the receivable
frequencies in the band currently being
listened to, and then recall them with the
touch of a button later. This function is
especially useful when you are travelling and
do not know what stations are available. Up to
6 frequencies can be stored this way.
frequencies in the band currently being
listened to, and then recall them with the
touch of a button later. This function is
especially useful when you are travelling and
do not know what stations are available. Up to
6 frequencies can be stored this way.
Select the band for auto memory entry.
Touch [ AME ].
Touch [
4 ] or [ ¢ ] to start auto memory
entry.
The preset station numbers [ 1 ] - [ 6 ] are
shown in order.
shown in order.
When all the stations in a certain band are
stored in the preset memory, the auto memory
entry stops. The tuner then plays the last
station received.
stored in the preset memory, the auto memory
entry stops. The tuner then plays the last
station received.
• When the AF function is turned on whilst auto
memory entry takes place, only RDS stations
(i.e., stations with RDS capability) are stored.
RDS stations that have been preset for FM1
cannot also be preset in FM2 or FM3.
(i.e., stations with RDS capability) are stored.
RDS stations that have been preset for FM1
cannot also be preset in FM2 or FM3.
• When the local seek function is turned whilst
auto memory entry takes place, stations with
poor reception are not stored.
poor reception are not stored.
• When the Traffic Information function is on,
only the local traffic information station
frequency will be stored.
frequency will be stored.
NOTE
3
2
1
NOTE
2
1
Selecting the FM Bands
Touch [ FM ] to select the FM band.
Each time you touch [ FM ] , the band switches
between the FM1, FM2 and FM3.
Each time you touch [ FM ] , the band switches
between the FM1, FM2 and FM3.
Selecting the MW/LM Band
Touch [ AM ] to select the MW/LW band.
Selecting the Seek Mode
You can choose from three seek modes: auto
seek, preset station seek, and manual seek.
seek, preset station seek, and manual seek.
Each time you touch [ SEEK ], the mode switches
as follows:
as follows:
▼
AUTO 1:
Auto Seek Mode
▼
AUTO 2:
Preset Station Seek Mode
▼
MANU:
Manual Seek Mode
Tuning
Auto Seek Mode (AUTO1)
• Touch [
• Touch [
¢ ] to seek increasing frequencies.
• Touch [
4 ] to seek decreasing frequencies.
Preset Station Seek Mode (AUTO2)
• Touch [
• Touch [
¢ ] to move to the next preset station.
• Touch [
4 ] to move to the last preset station .
Manual Seek Mode (MANU)
• Touch [
• Touch [
¢ ] to increase the frequency by one
step.
• Touch [
4 ] to decrease the frequency by one
step.
The ST indicator is displayed when stereo
broadcasts are being received.
broadcasts are being received.
NOTE
E
K
FM/AM Tuner Control Function
C
F
A
D
FM/AM Tuner Control Screen
Preset Band Preset number
Frequency
K
C
F
E
Radio-Text/Program Service name
B
A
G
H
I
J
L
TI indicator
LO.S indicator
NEWS indicator
ST indicator
AF indicator
AUTO 1/AUTO 2 /MANU indicator
D