Kenwood TM-271 User Manual

51

This function causes the transceiver to remain in
transmission mode for 2 seconds after you release each
key.  So, you can release Mic [PTT] while sending DTMF
tones.

1 Press [F], [MENU] and turn the Tuning control to

select Menu No. 30 (DT.H).

2 Press [MENU] and turn the Tuning control to select

“ON” or “OFF” (default).

3 Press [MENU] to store the setting or any other key to

cancel.

4 Press any key other than [MENU] to exit Menu Mode.

If you use the 10 dedicated DTMF Memory Channels to
store DTMF numbers, you do not need to remember a
long string of digits.

1 Press [F], [MENU] and turn the Tuning control to

select Menu No. 28 (DTMF.MR).

2 Press [MENU] and turn the Tuning control to select

your desired DTMF Memory Channel number from 0
to 9.

• You can also select a DTMF Memory Channel by using

Mic [UP]/[DWN].

3 Press [MENU].

• The DTMF code entry display appears and the first digit

blinks.

4 Turn the Tuning control to select a DTMF code.

• You can also enter a DTMF code using the Mic keypad.

Simply press your desired DTMF codes on the keypad.

• On the display, 

 is represented by “E” and   is

represented by “F”.

5 Press [MR] to select the DTMF code and move the

cursor to the next digit.

• To move to the previous digit, press [VFO].  To delete

the character at the current cursor position, press [F].