Kenmore 27'' Laundry Center w/ Electric Dryer Specification Guide

INSTALLATION INSTRUCTIONS

BEFORE YOU BEGIN

Read these instructions completely and carefully.

• IMPORTANT- Save these instructions for local inspector’s

use.

• IMPORTANT- Observe all governing codes and ordinances.

• Note to Installer - Be sure to leave these instructions with

the customer.

• Note to Customer - Keep these instructions with your Use

and Care Book for future reference.

• Before the appliance is removed from service or discarded,

remove the washer and dryer doors.

• Inspect the dryer exhaust outlet and straighten the outlet

walls if they are bent.

• Service information and the wiring diagram are located at

the access panel.

• Do not allow children on or in the appliance. Close supervi-

sion of children is necessary when the appliance is used
near children.

• Install the appliance where the temperature is above 50°F

for satisfactory operation of the control system.

Slip Pliers

Phillips Screwdriver

Flat-blade Screwdriver

1/4 Nutdriver

Level

Tools You Will Need

WARNING RISK OF FIRE

• To reduce the risk of severe injury or death, follow all in-

stallation instructions.

• Appliance installation must be performed by a qualified in-

staller.

• Install the appliance according to these instructions and in

accordance with local codes.

• This appliance must be exhausted to the outdoors.

• Use only 4” rigid metal ducting for exhausting the clothes

dryer to the outdoors.

• DO NOT install a clothes dryer with flexible plastic ducting

materials. If flexible metal (semi-rigid or foil-type) duct is
installed, it must be UL listed and installed in accordance
with the instructions found in the section "Connecting The
Dryer To House Vent". Flexible venting materials are known
to collapse, be easily crushed, and trap lint. These condi-
tions will obstruct dryer airflow and increase the risk of fire.

• Do not install or store this appliance in any location where

it could be exposed to water and or weather.

• Save these instructions. (Installers: Be sure to leave these in-

structions with the customer).

NOTE: Installation and service of this appliance requires ba-
sic mechanical and electrical skills. It is your responsibility to
contact a qualified installer to make the electrical connec-
tions.

Materials You Will Need

Parts Supplied

4 Dia. Metal Duct

(Recommended)

4 Dia. Flexible Metal (Semi-Rigid)

UL Listed Transition Duct (If

Needed) Kit WX08X10077

(Includes 2 Elbows)

4 Dia. Flexible Metal (Foil Type)

UL Listed Transition Duct

(If Needed)

4 Cover Plate (If Needed)

(Kit WE1M454)

Duct Tape

3/4 Strain

Relief

UL Recognized

Gloves

Safety Glasses

Exhaust

Hood

4 Dia. Metal

Elbow

4 Duct

Clamps (2)

4 Spring

Clamps (2)

Appliance Power

Cord Kit

(Not Provided)

UL Rated 120/240 V, 30 A

With 3 or 4 Prongs. Identify the

Plug Type as Per the House

Receptacle Before Purchasing

Line Cord.

1 Cable Tie

2 Washer Hoses

2 Rubber Washers

(washers may be

in water hoses)

2 Stainer Screens/

Ruber Washers