Kenmore Flue Extension for Glass Canopy Chimney Hood for Tall Ceilings Installation Guide

TOOLS NEEDED FOR INSTALLATION

Screwdriver

(Flat &

Phillips)

Pencil

Tape

Measure

Drill

Sabre

Saw

Keyhole

Saw

-or-

Duct Tape

Wire

Stripper

PARTS NOT INCLUDED WITH HOOD*

CLEANING

Proper maintenance of the Range Hood will assure proper

performance of the unit.
MOTOR

The motor is permanently lubricated and never needs oiling. If

the motor bearings make excessive or unusual noise, replace

the motor with the exact service motor. The impeller should

also be replaced.
GREASE FILTER

The grease filter should be cleaned frequently. Use a warm

dishwashing detergent solution. Grease filter is dishwasher safe.

Clean all-metal filters in the dishwasher using a non-phosphate

detergent. Discoloration of the filter may occur if using phos-

phate detergents, or as a result of local water conditions - but

this will not affect filter performance. This discoloration is not

covered by the warranty.

Remove grease filter by pushing in on the metal latch tab. This

will disengage the filter from the hood. Tilt the filter downward

and remove.
NON-DUCTED RECIRCULATION FILTER

The non-ducted recirculation filter should be changed every

6 months. Replace more often if your cooking style generates

extra grease, such as frying and wok cooking. Turn the filter

mounting tabs to remove filter and replace.
STAINLESS STEEL CLEANING
DO:

• Regularly wash with clean cloth or rag soaked with warm

water and mild soap or liquid dish detergent.

• Always clean in the direction of original polish lines.

• Always rinse well with clear water (2 or 3 times) after clean-

ing. Wipe dry completely.

• You may also use a specialized household stainless steel

cleaner.

DON’T:

• Use any steel or stainless steel wool or any other scrapers

to remove stubborn dirt.

• Use any harsh or abrasive cleansers.

• Allow dirt to accumulate.

• Let plaster dust or any other construction residues reach the

hood. During construction/renovation, cover the range hood

to make sure no dust sticks to the stainless steel surface.

Avoid: When choosing a detergent

• Any cleaners that contain bleach will attack stainless steel

• Any products containing: chloride, fluoride, iodide, bromide

will deteriorate surfaces rapidly.

• Any combustible products used for cleaning such as ac-

etone, alcohol, ether, benzol, etc., are highly explosive and

should never be used close to a range.

PARTS INCLUDED WITH HOOD

7 MOUNTING

SCREWS

(#8 X 1-1/2”

Flat Head)

7 DRYWALL

ANCHORS

8 MOUNTING SCREWS

(#8 x 3/8” Pan Head)

DECORATIVE FLUE

2 WASHERS

UPPER

FLUE MOUNTING

BRACKET

HOOD

MOUNTING

BRACKET

DAMPER / DUCT

CONNECTOR

MOUNTING

SCREWS

(M4 X 1-in.

Flat Head)

4 DECORATIVE

WASHERS

GLASS

CANOPY

HOOD

HOUSING

LOWER

FLUE MOUNTING

BRACKET

2 BULBS

B10, 120V

40W MAX.

4 RUBBER

BUSHINGS

NON-DUCT

PLENUM

2 TIE

WRAPS

FLEXIBLE DUCT

NON-DUCTED

RECIRCULATION

FILTER

NON-DUCT

PLENUM

COLLAR

8 MOUNTING

SCREWS

(#8 x 3/8” Pan Head)

NON-DUCT KIT - KENMORE PART NO. 59921

9-FT. CEILING FLUE

EXTENSION

KENMORE

PART NO. 59920

* Parts Not Included With Hood” are available by

calling 1-800-4-MY-HOME