JVC KA-MR100G User Manual
8
Note:
● This product does not support the USB interface
ExpressCard. Use a recommended SxS memory card.
(
(
● Do not insert the SxS memory card in the reverse
direction. The card slot is designed such that the card
cannot be inserted in the reverse direction. Do not force
the card into the card slot as this will cause malfunction.
cannot be inserted in the reverse direction. Do not force
the card into the card slot as this will cause malfunction.
Inserting the SxS memory card
1 Slide the tab of the card slot cover horizontally to
open the cover
2 Insert the SxS memory card into the card slot
● Insert the card with the label facing you as illustrated
below.
● The access lamp lights up in red. When the card is ready
to be used, the light turns green.
3 Close the card slot cover
Memo
:
● If a AFORMATB message appears on the LCD panel,
make sure to format (initialize) the card using the memory
recorder. (“Menu screen’s [MEDIA]-[FORMAT] settings”
(
recorder. (“Menu screen’s [MEDIA]-[FORMAT] settings”
(
Note:
● SxS memory cards that are formatted using another
product cannot be used on this memory recorder.
Write-protect Switch of SxS Memory
Card
Card
To disable recording or deletion of video clips to or from the
SxS memory card so as to protect the recorded clips, set the
write-protect switch at the side of the SxS memory card to
“WP”. When using a write-protected SxS memory card, a
message indicating
SxS memory card so as to protect the recorded clips, set the
write-protect switch at the side of the SxS memory card to
“WP”. When using a write-protected SxS memory card, a
message indicating
AWRITE PROTECT!B will appear on the
status screen of the LCD panel for about three seconds. For
details, please refer to the instruction manual of the SxS
memory card.
details, please refer to the instruction manual of the SxS
memory card.
Note:
● Do not operate the write-protect switch of the SxS memory
card when it is inserted into the memory recorder.
Removing the SxS Memory Card
Note:
● Do not remove the SxS memory card when the memory
recorder lights up in red. Before removing the card, make
sure that the access lamp lights up in green color.
sure that the access lamp lights up in green color.
1 Slide the tab of the card slot cover horizontally to
open the cover
2 Press the [EJECT] button at the side of the slot
to unlock
3 Press [EJECT] button again, and remove the SxS
memory card
4 Close the card slot cover
The maximum recording time of an SxS memory card varies
according to the format of the input signals as shown in the
table below.
according to the format of the input signals as shown in the
table below.
When using a 32 GB SxS memory card
Memo
:
● The values in the table are for reference and are not
guaranteed values. These are not the maximum possible
duration during continuous recording. The maximum
duration for continuous recording when the battery is fully
charged varies according to the battery type.
duration during continuous recording. The maximum
duration for continuous recording when the battery is fully
charged varies according to the battery type.
Inserting/Removing the
SxS Memory Card
SxS Memory Card
Label
SxS memory card
Card slot cover
Open tab
Maximum Recording Time
of SxS Memory Card
of SxS Memory Card
Mode
Video Format
Max. Recording
Time
HD1
720 (50p/25p/60p/30p/24p)
Approx. 180 mins
HD2
1080 (50i/60i)
Approx. 140 mins
Open tab
Card slot cover
SxS memory card
[EJECT] button
KA-MR100G_EN.book Page 8 Thursday, February 5, 2009 5:28 PM