JVC PC Connection Kit User Manual
EN
37
1 P.AE/Effect buttons
• Selects one of the 5 P.AE/Effects
available per programmed scene.
• To cancel the selected effect, click the
EC (Effect Clear) button.
2 Fade/Wipe Effect buttons
• Selects one of the 7 Picture Wipes or 10
Fades/Wipes available per scene
transition.
transition.
• To cancel the selected effect, click the
TC (Transition Clear) button.
3 Elapsed Time
• Displays the total elapsed time of all the
programmed scenes.
4 Button for Opening the Controller
Window
• Displays the controller.
• Can be displayed even when selecting
• Can be displayed even when selecting
the menu Window — Controller.
5 Program list
• Displays the following setting
information beginning from the left:
Scene number, In point, P.AE/Effect, Out
point, Fade/Wipe Effect, Duration Time
Counter, and Memo.
Scene number, In point, P.AE/Effect, Out
point, Fade/Wipe Effect, Duration Time
Counter, and Memo.
• Up to 99 programs can be set per file for
scenes specified by an In and Out point.
6 ID number
• Displays the video source unit’s ID
number.
• An ID number can be clicked to display
the JLIP Devices dialog box as well as
when switching the serial port or
performing JLIP devices scanning.
when switching the serial port or
performing JLIP devices scanning.
7 Edit Indicator
• In Normal mode, the deck being
operated is displayed in green.
• In Edit mode, both deck indicators light
(Player: Green, Recorder: Red) and an
arrow also lights.
arrow also lights.
• The recorder lights red between the In
point and Out point while the recorder
is actually recording.
is actually recording.
• Clicking on either deck selects the one
to be operated.
8 Tape counter display
• Displays the current tape position.
ex.
00:
01:
45:
10
(Hours : Minutes : Seconds : Frames)
• The digital camera’s counter uses a
drop-frame system.
9 Close button
• Close the controller window.
0 Edit buttons
A. Edit Standby button
• The player is put into Pause mode for
the Syncro Edit pre-roll time already set
on the Options dialog box (see
page 52).
on the Options dialog box (see
page 52).
• This button is used when VCRs not
compatible with this editing system and
performing manual editing.
performing manual editing.
• This button cannot be clicked when the
counter reads less than 00:00:30:00.
• This button cannot be clicked when the
player is not paused.
B. Syncro Edit button
• After going into Playback-Pause mode at
the In point of the recorder and player,
clicking this button rewinds both decks
by the pre-roll amount and executes the
first event.
clicking this button rewinds both decks
by the pre-roll amount and executes the
first event.
• Since no Out point is specified, the
Syncro Edit is stopped using Stop.
• This button cannot be clicked when the
counter reads less than 00:00:30:00.
• This button cannot be clicked when the
player is not paused.
C. Select Player/Recorder button
• Selects the deck to be operated. The
player is forcibly selected when no
recorder is connected to the JLIP.
recorder is connected to the JLIP.
• This button cannot be clicked when
there is no JLIP recording equipment.
A B
C