JVC KS-BTA200 Instruction Manual

ENGLISH

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service center.

Symptoms

Remedies

Bluetooth device does not detect the unit.

• This unit can be connected with one Bluetooth cellular

phone and one Bluetooth audio device at a time.
While connecting a device, this unit cannot be detected
from another device. Disconnect currently connected
device and search again.

The unit does not detect the Bluetooth device.

• Check the Bluetooth setting of the device.
• Search from the Bluetooth device. After detecting the

unit, select “Open” on the unit to connect the device.

“Device Unfound/UNFOUND” appears on the display.

• Check the Bluetooth setting of the device, then search

again.

The unit does not make pairing with the Bluetooth
device.

• Enter the same PIN Code to the unit and target device.
• Select the device name from “Special Device,” then

connect again.

“Connection Error/ERR CNT” appears on the display.

• Select “Connect” to connect the device again.

Echo or noise occurs.

• Adjust the position of the microphone unit.

“Error/ERROR” appears on the display.

• Try the function again.
• (If the message appears again)

The connected device is not equipped with the
function.

“Loading/LOADING” appears on the display.

• Try the function again.

“Please Wait/WAIT” appears on the display.

• Wait until the message goes off.
• (If the message does not go off)

Turn Off, then turn On the power to the receiver.

“Reset 08/RESET 8” appears on the display.

• Check the connection between the adapter and the

unit.

• Turn Off, then turn On the power to the receiver.

Phone sound quality is poor.

• Reduce the distance between the unit and the

Bluetooth cellular phone.

• Move the car to a place where you can get a better

signal reception.

KS-BTA200_book.indb 32

06.12.21 5:08:05 PM