Jet Tools J150ECA User Manual

11

1. Remove side cover screws

using 5/16" nut-driver.

2. Remove side cover.
3. Pull upper fuel line off fuel

filter neck.

4. Carefully pry bushing,

lower fuel line, and fuel
filter out of fuel tank.

5. Wash fuel filter with clean

fuel and replace in tank.

6. Attach upper fuel line to

fuel filter neck.

7. Replace side cover.

1. Remove upper shell (see

page 10).

2. Remove fan (see page 17).
3. Loosen flare nut using 3/4"

open-end wrench. Push fuel
tube down, away from
burner head. Fuel filter is
located inside of fuel tube.

4. Lift out fuel filter.
5. Wash fuel filter with clean

fuel and replace in fuel
tube.

6. Connect fuel tube to burner

head. Attach flare nut until
nut seats against fuel tube
and fitting. Tighten 1/4 turn
more using 3/4" open-end
wrench (100-130 inch-
pounds/11.3-14.7 n-m).

7. Replace fan (see page 17).
8. Replace fan guard and

upper shell.

Burner
Head

Combustion
Chamber

Fuel Filter

Fuel Tube

Flare Nut

Fuel Filter, Bushing,
and Lower Fuel Line

Upper
Fuel Line

Side Cover