Jensen BT360 User Manual
2
Installing the junction box
This Car Kit is designed to work with a 12 - 24-volt vehicle power
supply. Refer to the following to install the junction box in a vehicle.
1. Locate a suitable place inside the car to mount the junction
box. Select a dry place that avoids excessive heat and
mechanical vibration. Ideally, the junction box should be
hidden from view, but still easily accessible.
Note:
Make sure that the cables are long enough to support
the location of the junction box. If the cables are not long
enough, do not lengthen the cables; relocate the junction
box.
2. Use two screws (not included) to fasten the junction box in
place.