Jack Lalanne's Power Juicer Power Juicer Express Owner's Manual
Lip
Pulp Guard
Chute
Locking Bar
5
Pusher
Filter/Blade
MAIN UNIT
(Fully Assembled)
Receptacle
Removable
Non-Drip Spout
Safety MicroSwitch
(Located on reverse side)
Base
Pulp
Collector
PARTS LIST
Lid with Built-in Pulp Guard
Locking
Bar
8
DISASSEMBLY
IMPORTANT:
Before disassembling the unit make sure you turn the power OFF
and unplug the machine from the electrical outlet.
STEP 2:
Lower the locking bar (silver) into position
as shown.
as shown.
STEP 3:
Remove lid with built-in pulp guard by
pulling up off of receptacle.
pulling up off of receptacle.
STEP 1:
Remove pusher from the chute.
1
STEP 5:
Remove filter/blade/receptacle unit from base
by grasping the receptacle with two hands. Then
lift receptacle and twist in either a clockwise or
counter-clockwise direction while pulling in an
upward direction until filter/blade/receptacle unit
is separated from the main base.
Note:
by grasping the receptacle with two hands. Then
lift receptacle and twist in either a clockwise or
counter-clockwise direction while pulling in an
upward direction until filter/blade/receptacle unit
is separated from the main base.
Note:
Do not remove screws from blade. The filter
and the blade are one piece. They are not meant
to be separated.
to be separated.
STEP 4:
Remove pulp collector by sliding the
bottom away from the base in the
direction of the arrows while unhooking
from under lip on receptacle.
bottom away from the base in the
direction of the arrows while unhooking
from under lip on receptacle.
2
Chute
Pusher
Pulp
Collector
Receptacle
Lid with built-in
Pulp Guard
3
5
4
Pulp Collector
Base
Lip
Base
Receptacle
Lift and Twist......