Mustek PP7000-II User Manual

 

•  Place the printer on a sturdy, level surface. 
•  Choose a place that is well ventilated and free of 

excessive dust, smoke or fume. 

•  Do not put the printer under direct sunlight or near a 

heater. 

•  Ideal room temperature is from 5ºC to 40ºC. Ideal 

humidity is from 20% to 85% RH (no condensation). 

•  Since the paper roll is highly thermal sensitive, please 

keep them in a dark place that is 20º and 65% RH when 
not installed in the printer. 

•  Use a grounded AC power outlet. 
•  Use only the power cord and power adaptor furnished 

with the printer. 

•  Do not use a power outlet of a circuit shared with any 

equipment that causes great electrical noise, such as 
motors. 

•  Do not use a power outlet of a circuit shared with any 

equipment that uses a lot of power, such as a copier or a 
coffee maker. 

•  Do not touch any connector contacts to avoid possible 

electrostatic damage. 

•  Do not allow the cut receipt to slide back into the cutter 

during the operation. As this would lead to multiple 
cutting at the lower edge of a receipt and the multiple 
cut thin slips tend to cause mechanical malfunction. 

 

1 - 5