MTD Series 020 User Manual

Figure 3-1

IMPORTANT: This unit is shipped without gasoline or oil 
in the engine. Be certain to service engine with gasoline 
and oil as instructed in the separate engine manual 
before operating your machine.

NOTE: All references in this manual to the left or right 
side of the chipper shredder vacuum is from the operat-
ing position only. Exceptions, if any, will be specified.

Cut each corner of the carton vertically from top to 
bottom. 
Remove all loose parts.
Remove loose packing material.

1.

2.
3.

Lift unit from the rear to detach it from underlying 
carton material and roll unit out of carton.
Check carton thoroughly for any other loose parts.

NOTE: Make sure not to crimp cables while removing
loose parts or the entire unit from the carton.

Upper and Lower Handle
Bag
Blower Chute (Optional)
Safety Glasses
Engine Oil (May be located in bag)
Operator’s Manual

1.

2.

•
•
•
•
•
•

NOTE: All references 
in this manual to the 
left or right side of 
the chipper shredder 
vacuum is from the 
operating position only. 
Exceptions, if any, will 
be specified.

This unit is shipped 

without gasoline or 

oil in the engine. Be 

certain to service 

engine with gasoline 

and oil as instructed 

in the separate engine 

manual before operat-

ing your machine.

Bottle of Engine Oil

† If Equipped

Operator’s Manual

Safety Glasses

Lower Handle

Wing Nuts

Bag

†Blower Chute

Carriage 

Bolts

Carriage 

Screws

Handle Knobs

Upper Handle

Rope Guide

Wing Nut