Multi-Tech Systems MultiVOIP GSM SIP-to-Cellular Gateways MVPGSM-2 User Manual
Multi-Tech Systems, Inc.
MVPGSM
11
Chapter 3 – Software Installation
Introduction
Configuring software for your MultiVOIP GSM entails three tasks:
Loading the software onto the PC (this is “Software Installation” and is discussed in this chapter).
Setting values for telephony and IP parameters that will fit your system (details are in Chapter 4).
Establishing “phonebooks” that contain the various dialing patterns for VOIP calls made to different locations (a
detailed discussion of this is found in Chapter 5).
detailed discussion of this is found in Chapter 5).
Loading MultiVOIP GSM Software onto the PC
The software loading procedure does not present every screen or option in the loading process. It is assumed
that someone with a thorough knowledge of Windows and the software loading process is performing the
installation.
that someone with a thorough knowledge of Windows and the software loading process is performing the
installation.
1. Be sure that your MultiVOIP GSM has been properly cabled and that the power is turned on.
2. Insert the MultiVOIP GSM CD into your CD-ROM drive. The CD starts automatically. It may take a few
2. Insert the MultiVOIP GSM CD into your CD-ROM drive. The CD starts automatically. It may take a few
moments for the Multi-Tech CD installation window to display.
MVPGSM splash screen
3. When the Multi-Tech Installation CD dialog box appears, click the Install Software icon.