Multi-Tech Systems MultiVOIP GSM SIP-to-Cellular Gateways MVPGSM-2 User Manual
Chapter 5: Phonebook Configuration
Multi-Tech Systems, Inc.
MVPGSM
63
Authorized User Name and Password for SIP
To enable the Registration Options on the Add/Edit Inbound Phone Book, you have to activate Use SIP
Proxy Option on the Call Signaling, SIP Parameters Screen. Then add the IP address for the Primary Proxy
in the SIP Proxy Parameters. This allows you to add a Username and Password to the Inbound Phone
Book entry.
Proxy Option on the Call Signaling, SIP Parameters Screen. Then add the IP address for the Primary Proxy
in the SIP Proxy Parameters. This allows you to add a Username and Password to the Inbound Phone
Book entry.
This feature is used when the MultiVOIP GSM registers with the proxies that support authorization and
need the username, password and the endpoint name to be unique.
need the username, password and the endpoint name to be unique.
The VOIP sends Register request to Registrar for each entry with its configured Username and Password.
When Authentication is enabled for the endpoint, then the registrar/proxy sends “401
Unauthorized/407 Proxy Authentication Required” response when it receives a REGISTER/INVITE
request. Now, the endpoint has to send the authentication details in the Authorization header. In this
header one of the fields is “username”.
When Authentication is enabled for the endpoint, then the registrar/proxy sends “401
Unauthorized/407 Proxy Authentication Required” response when it receives a REGISTER/INVITE
request. Now, the endpoint has to send the authentication details in the Authorization header. In this
header one of the fields is “username”.
Generally proxies accept requests even if both Endpoint Name and Username are same. But some
proxies expect that the Endpoint Name and Username should be different.
proxies expect that the Endpoint Name and Username should be different.
To support these proxies, we have the username and password configuration for every inbound phone
book entry which gets registered with a proxy.
book entry which gets registered with a proxy.
If the username and password are not configured in the inbound phone book, then the registration will
happen with the default username and password that are configured in the SIP Call Signaling Page.
happen with the default username and password that are configured in the SIP Call Signaling Page.
Phone Book Save and Reboot
When your Outbound and Inbound Phonebook entries are completed, click on Save Setup in the sidebar menu
to save your configuration. You can change your configuration at any time as needed for your system.
to save your configuration. You can change your configuration at any time as needed for your system.
Remember that the initial MultiVOIP GSM setup must be done locally using the MultiVOIP GSM program. After
the initial configuration is complete, all of the MultiVOIP GSM units in the VOIP system can be configured, re-
configured, and updated from one location using the MultiVOIP GSM web interface software program or the
MultiVOIP GSM program.
the initial configuration is complete, all of the MultiVOIP GSM units in the VOIP system can be configured, re-
configured, and updated from one location using the MultiVOIP GSM web interface software program or the
MultiVOIP GSM program.