Multi-Tech Systems MultiVOIP GSM SIP-to-Cellular Gateways MVPGSM-2 User Manual

Chapter 6: Using the Software 

Multi-Tech Systems, Inc. 

MVPGSM 

77 

The Download User Defaults command allows you to maintain a known working configuration that is specific to 
your VOIP system.  You can then experiment with alterations or improvements to the configurations confident 
that a working configuration can be restored if necessary.  

1. Before you can use the Download User Defaults command, you must first save a set of configuration 

parameters by using the Save Setup command in the sidebar menu of the MultiVOIP GSM software.  

 

2. Before the setup configuration is saved, you will be prompted to save the setup as the User Default 

Configuration. Select the checkbox and click OK. 
A user default file will be created.  The MultiVOIP GSM unit will reboot itself. 

3. To download the user defaults, go to Start | Programs | MultiVOIP GSM x.xx | Download User Defaults. 

4. A confirmation screen will appear indicating that this action will entail rebooting the MultiVOIP GSM.   

 

Click OK. 

5. Progress bars will appear during the file transfer process. 

 

6. When the file transfer process is complete, the Dialog / IP Parameters screen will appear. 

 

7. Set the IP values per your particular VOIP system.  Click OK.  Progress bars will appear as the MultiVOIP GSM 

reboots itself.