Mr. Coffee BVMC-BMH23 User Manual
2
3
IMPORTANT SAFEGUARDS
To reduce the risk of fire, electric shock and/or injury to persons, basic safety
precautions should always be followed when using electrical appliances,
including the following:
1. READ ALL INSTRUCTIONS BEFORE USING THE MACHINE.
2. To protect against electric shock, do not immerse cord, plugs or machine in
precautions should always be followed when using electrical appliances,
including the following:
1. READ ALL INSTRUCTIONS BEFORE USING THE MACHINE.
2. To protect against electric shock, do not immerse cord, plugs or machine in
water or in any other liquid.
3. Close adult supervision is necessary when this appliance is used by or near
children.
4. Press START/STOP button and unplug from outlet when not in use and before
cleaning. Allow the appliance to cool before installing or removing parts and
before cleaning the appliance.
before cleaning the appliance.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or after the
6. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or has been damaged in any manner. Return this
appliance only to the nearest Authorized Service Center for examination, repair
or adjustment.
appliance only to the nearest Authorized Service Center for examination, repair
or adjustment.
7. The use of accessory attachments not recommended for MR. COFFEE
®
products
may cause hazards or injuries.
8. Do not use the appliance outdoors.
9. Do not let the appliance cord hang over edge of table or counter, or touch hot
9. Do not let the appliance cord hang over edge of table or counter, or touch hot
surfaces.
10. Check the appliance hopper for presence of foreign objects before using.
11. Do not place this appliance on or near a hot gas or electric burner or in a
11. Do not place this appliance on or near a hot gas or electric burner or in a
heated oven.
12. To disconnect, press the START/STOP button, then remove the plug from the
wall outlet.
13. Do not use the appliance for other than intended household use.
WARNING! To reduce the risk of fire or electric shock, do not remove any
service covers. There are no user serviceable parts inside the Burr Mill.
Only authorized personnel should repair the Burr Mill.
Only authorized personnel should repair the Burr Mill.
Please read ALL of the instructions in this manual carefully before you begin
to use this appliance. Proper care and maintenance will ensure a long life and
a trouble-free operation for this appliance. Please save these instructions and
refer to them for cleaning and care tips.
to use this appliance. Proper care and maintenance will ensure a long life and
a trouble-free operation for this appliance. Please save these instructions and
refer to them for cleaning and care tips.
SAVE THESE INSTRUCTIONS
INTRODUCTION
Thank you for selecting Mr. Coffee BMH Series Burr Mill. Only a MR. COFFEE
Thank you for selecting Mr. Coffee BMH Series Burr Mill. Only a MR. COFFEE
®
Burr Mill delivers better taste at a great value!
SPECIAL CORD SET INSTRUCTIONS
1. A short power supply cord is provided to reduce the hazards resulting from
1. A short power supply cord is provided to reduce the hazards resulting from
a person or pet becoming entangled in, or tripping over, a longer cord.
2. An extension cord may be purchased and used if care is exercised
in its use.
3. If an extension cord is used, the marked electrical rating of the extension
cord must be at least 10 amps and 120 volts. The resulting extended cord
must be arranged so that it will not drape over a countertop or tabletop
where it can be pulled on by children or tripped over accidentally.
must be arranged so that it will not drape over a countertop or tabletop
where it can be pulled on by children or tripped over accidentally.
4. This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do not modify the plug in any way.
way. If the plug does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do not modify the plug in any way.
5. You can customize the length of the power cord so that it is the exact
length you desire. To increase the length of the power cord: grasp the
power cord (not the power plug) and gently lift it out of the slot, then pull
it away from the grinder. To decrease the length of the power cord: grasp
the power cord (not the power plug), lift it out of the slot and wrap into
the base of the grinder. Lock the cord in the slot when finished.
power cord (not the power plug) and gently lift it out of the slot, then pull
it away from the grinder. To decrease the length of the power cord: grasp
the power cord (not the power plug), lift it out of the slot and wrap into
the base of the grinder. Lock the cord in the slot when finished.