Motion CL900 FWS-001 User Manual

42    

Chapter 2

Using your CL900

Using speech recognition

9. Follow the on-screen instructions. 

10.Press Esc to end the process.

Resetting the display after returning the tablet to the docking station

If you set up your tablet in a docking station with the display theme expanded across both, 

and you remove the tablet temporarily from the docking station, the display theme may 

need to be reset when you return the tablet to the docking station. 

If it doesn’t seem to work, change the Display Scheme to Tablet Only and then change it 

to the desired scheme.

Using speech recognition

You can use speech recognition to interact with your tablet by voice. You can dictate 

documents and emails or use voice commands to control programs.

•

Dictation mode—With Dictation mode, your tablet listens to everything you say and 
converts your words to text. You can use dictation mode to enter text directly into any 
document or text box.

•

Voice command mode—With Voice command mode, your tablet listens for specific 
words that correspond to a list of available voice commands. You can use commands to 
switch between programs, save documents, copy, paste or undo.

Setting up speech recognition

Before you can use speech recognition, you must configure the microphones and train the 

system for the characteristics of your voice. Then, you can take the available speech tutorial 

to learn basic voice commands.

Set up the microphones

For best results, move to a quiet environment.

1. In Control Panel, tap the Ease of Access category, then tap Speech Recognition.

2. Tap Set up microphone.

3. If you are using the tablet’s microphone array, select Other.

4. Follow the instructions in the setup program.

5. If the microphones are set to an appropriate level, the meter will stay in the green zone 

while you read the sentences. If the level is too low or too high, use Motion Dashboard to 
adjust the level (page 16).