Motorola 2.1 User Manual

Page of 135
Chapter 2: Network Setup  
Chapter 
Chapter 2: Network Setup 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
 
.  
 
.  
Small System Reference Design 
 
This section details a small system reference design.  By understanding the small reference 
design one can apply these details to larger networks.  A small system reference design is 
defined as a network in which the network servers and associated networking hardware are 
located at a central location.  Wireless or wired bridging may be used to provide connectivity 
between the Intelligent Access Points and the switch / router backend. 
Our small system reference design has the following attributes: 
• 
Support for at least 20 IAPs (gateways). 
• 
All IAPs and MWRs will utilize DHCP for network addressing. 
•  The Network will be configured and managed with the One Point Wireless 
Manager™ application residing on a RedHat ES 4 Linux server. 
• 
A Windows 2003 RADIUS server will provide authentication for Secure Mesh. 
• 
The standard small network design does not include server or network hardware 
redundancy.  
 
Network Requirements 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
 
.  
Network Servers 
There are two network servers used in the small system reference design.  The following is 
the recommended hardware configuration for these two servers.  Variations from the 
recommended hardware configuration may result in inadequate system performance. 
• 
Enterprise grade server (e.g. Hewlett-Packard ProLiant DL360-G5 3.00GHz 
Server) 
• 
Minimum 2 GB of RAM 
• 
(2) 36.4 GB 15K RPM SCSI Hard Disk Drives 
2-5