Motorola m250 User Manual
Tags
Tags are used to store the properties information about a digital audio file (size, type, rate, etc.). This information is
displayed at the bottom of the LCD during playback of each song; refer to the sample Play screens in Chapter
displayed at the bottom of the LCD during playback of each song; refer to the sample Play screens in Chapter
1
.
Occasionally this information might not display properly, especially if a file was downloaded from a site outside of the
region in which you normally use the player. You may find it necessary to change the tag setting in order to see this
information. Changing a tag setting, however, may then cause other information to display improperly, so change tag
settings only if necessary.
region in which you normally use the player. You may find it necessary to change the tag setting in order to see this
information. Changing a tag setting, however, may then cause other information to display improperly, so change tag
settings only if necessary.
1 Open MENU by pressing Thumbstick to .
2 Move Thumbstick to select Settings.
3 Press Thumbstick in.
4 Move Thumbstick to select Tags. A warning message will be displayed about changing tag formats.
5 Press Thumbstick in.
6 Move Thumbstick Forward (
|
) and Reverse (
|
) to select the desired encoding options.
7 When the options are set as you want, press Thumbstick in.
8 Press Forward (
|
) to save settings and Reverse (
) to cancel them.
The tag formats available are ASCII (the most commonly used), UTF-8, and JIS (a Japanese format). Changing the
tag will not affect the rest of the LCD display.
tag will not affect the rest of the LCD display.
m250/m500 DIGITAL AUDIO PLAYER
50