Morphy Richards FP48953MEE User Manual

Carefully unpack your blender, as
the blades are very sharp.

Remove any stickers (except for
serial label) and wash all the parts
that are safe to immerse in water.

This may be wiped with a clean,
damp cloth. But only when
unplugged from the electrical
socket.

Use your blender for soups, sauces,
drinks, pates, mayonnaise, dressings
etc.

Your blender can also be used for
crushing ice for cocktails, desserts
etc.

The blender control switch has the
following settings. Pulse, off, speed 1
to speed 4. 

The speed can be adjusted whilst the
blender is in use.

Using the pulse setting allows greater
control over the texture of the food
produced. It is only intended to be
used for short ‘bursts’ of blending.

Ensure the blender base unit is
unplugged from the mains.

Place the blender jug onto the base
unit. Ensure that the jug is securely in
place 

B.

You are able to place the jug in 6
different positions for ease of use.

Place the food in the blender.

Place the lid onto the blender. Then
put the measuring cap into position
C.

Place the measuring cap into
position by pressing down and
turning clockwise, remove by doing it
in reverse.

Plug in the blender and turn the

control switch to either pulse or
speed 1 to speed 4 depending on
the desired consistency. Always
operate the blender with the lid in
place.

Never operate the blender with more
than 1 litre (13/4 pints) of liquid or
when empty.

The measuring cap can be used to
measure small quantities of liquid. 

Pour the liquid through the hole in
the lid.

Place the measuring cap back in the
lid, twisting to lock/unlock. Then
proceed with your blending.

Follow the procedure for blending
points 1-6, replacing food with ice
cubes to be crushed.

Plug in the blender and turn the
control switch to pulse position and
hold for several seconds 

D.

Note: The maximum capacity for ice
crushing at any one time is 500ml.

Use your blender for soups, sauces,
drinks, pates, mayonnaise, dressing
etc.

•

Don’t put dry ingredients into the
blender before switching on. If
necessary, cut them into pieces,
remove the filler cap, then, with the
machine running drop the pieces
through one by one.

•

When making mayonnaise, put all the
ingredients, except oil, into the
blender. Then with the machine
running, pour the oil slowly into the
blender through the filler cap hole.

•

Thick mixture, eg. pates and dips,
may need scrapping out with the
spatula. Ensure the appliance is
switched off first.

If the mixture is

difficult to process add more liquid.

•

When blending pour the liquids in
first and then add the solid food. 
Begin blending at the lower speed
and increase when needed.

⁄ Measuring cap
¤ Lid
‹ Glass jug
› Blender base unit
fi Control switch
fl Cable storage 
‡ Plug holder
· Lifting lip (aids lid removal)

1

2

3

4