Morgan & Company HEARTHSTONE 8470 User Manual
S
AFETY
L
ABEL
CONTACT YOUR LOCAL BUILDING
OFFICIALS ABOUT RESTRICTIONS
Listed Room Heater, Solid Fuel Type
Intertek Testing
Services NA, inc.
Manufactured by:
317 Stafford Ave.
Morrisville VT 05661
Morrisville VT 05661
SERIAL #
MODEL NAME: MORGAN 8470
TESTED TO: UL 1482, ULC S628, UL 737
Do not use grate or elevate fire. Build
wood fire directly on stone.
wood fire directly on stone.
Risk of smoke and flame spillage,
operate only with doors fully open
or fully closed.
operate only with doors fully open
or fully closed.
:
WARNINGS
“PREVENT HOUSE FIRES”
Clearance to Combustible Materials*
Date of Manufacture
2003 2004 2005 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
DO NOT REMOVE OR COVER THIS LABEL
MADE IN USA
3300-615
U.S. ENVIRONMENTAL PROTECTION AGENCY
Certified to comply with July 1, 1990 particulate emissions standards
* Refer to the Installation Manual for
additional clearance information.
additional clearance information.
Kit # 94-79700
Screen Kit # 94-69700
Blower Kit # 94-57700
Surround Caps Kit # 94-597051
Surround Extension Kit # 94-5970010
Blower Kit # 94-57700
Surround Caps Kit # 94-597051
Surround Extension Kit # 94-5970010
Mantle Shield Kit
OPTIONAL KITS:
WN 04380
INSPECTION IN YOUR AREA
AND INSTALLATION
TYPE OF FUEL: Solid Wood Only
CAUTION: HOT WHILE IN OPERATION. DO NOT TOUCH. KEEP
CHILDREN, CLOTHING AND FURNITURE AWAY. CONTACT MAY
CAUSE SKIN BURNS. SEE NAMEPLATE AND INSTRUCTIONS.
INSPECT AND CLEAN CHIMNEY AND CONNECTOR
FREQUENTLY. UNDER CERTAIN CONDITIONS OF USE,
CREOSOTE BUILDUP MAY OCCUR RAPIDLY.
CHILDREN, CLOTHING AND FURNITURE AWAY. CONTACT MAY
CAUSE SKIN BURNS. SEE NAMEPLATE AND INSTRUCTIONS.
INSPECT AND CLEAN CHIMNEY AND CONNECTOR
FREQUENTLY. UNDER CERTAIN CONDITIONS OF USE,
CREOSOTE BUILDUP MAY OCCUR RAPIDLY.
When installed on a combustible floor,
non-combustible floor protection, with a
R value of 1.0 or greater, is required to
cover the area beneath the heater, 16” in
front of, and 8” beyond both sides of the
glass opening. (See “Top View” diagram
non-combustible floor protection, with a
R value of 1.0 or greater, is required to
cover the area beneath the heater, 16” in
front of, and 8” beyond both sides of the
glass opening. (See “Top View” diagram
Do not obstruct space under heater.
Do not overfire. If the heater or
chimney connector glows, you are
overfiring.
chimney connector glows, you are
overfiring.
STOVE
D
Install and use only in accordance with
manufacture’s installation instructions and
your local building codes.
manufacture’s installation instructions and
your local building codes.
Connect to a code-approved masonry chimney
or listed factory-built fireplace chimney with a
direct flue connector into the first chimney liner
section.
or listed factory-built fireplace chimney with a
direct flue connector into the first chimney liner
section.
CAUTION: Special methods are required when
passing chimney through a wall or ceiling, refer
to local building codes. Do not connect this unit
to a chimney flue serving another appliance.
passing chimney through a wall or ceiling, refer
to local building codes. Do not connect this unit
to a chimney flue serving another appliance.
NOTE: Replace glass only with 5mm CERAMIC
or NEOCERAM glass.
or NEOCERAM glass.
STOVE
SI
D
EW
AL
L
A
C
B
TR
IM
IM
Front View
Top View
E
HEARTH
“TRIM” is defined as any combustible
protruding 1/2” or less from the wall.
protruding 1/2” or less from the wall.
A - 34” (87cm)
A - 22” (56cm) with Mantle Shield
B - 13” (33cm)
C - 3” (8cm)
D - 34” (87cm)
E - 16” (41cm)
A - 22” (56cm) with Mantle Shield
B - 13” (33cm)
C - 3” (8cm)
D - 34” (87cm)
E - 16” (41cm)
HearthStone Quality Home Heating Products, Inc.
® Morgan Model 8470
22