Monster iSport SuperSlim Wireless Bluetooth In Ear Sport Headphones User Manual

Page of 117
Product Overview
1. 
Indicator light
2. 
Charge jack
3. 
Volume + / Track Forward
4. 
Multifunction button 
(Power On/Off, Pairing,  
Activate Voice Dialing) 
5. 
Volume - / Track Backward
6. 
Microphone
INDICATOR LIGHT
DESCRIPTION
VOICE PROMPTS
Power on
Stays red 1 second
Power on
Power off
Stays red 2 seconds
Power off
Standby (connected)
Blink blue once every 5 seconds
/
Pairing
Flashes Red and Blue alternately
[ Pairing Tone ]
Incoming call
Flashes blue continuous
/
Charging
Stays on blue while charging
/
Basic operation
Charge the Battery
Your iSport® Wireless SuperSlim initially has 
enough power to complete the pairing and a few 
calls. When battery is low, you will hear warning 
tone and indicator light changes to red. The 
headphone includes a Micro USB cable that can 
be connected to your computer or other device 
made for USB charging. Plug the Micro USB end 
of the included USB cable into the USB micro port 
charger connector on the right channel side of the 
headphone. Plug the other end into a USB port 
on your computer or other devices made for USB 
charging. The indicator light will be blue while 
charging. Once fully charged, the indicator light 
will be off. Charge time is approximately 1.5 hours 
on an empty battery. 
Note: The lifetime of the battery will be significantly 
reduced if your headphone is left uncharged for a 
long period. We recommend that you recharge your 
headphone at least once a month. 
Power On/ Power Off
Press the Multifunction button for about 1 second 
to power on the headphone. To power off the 
headphone, press the Multifunction button for 
about 3 seconds.
Guide to Indicator Lights
Volume Control
Press the Volume “+” or “-” to turn volume up 
or down, you hear beep once you reach the 
maximum volume or minimum volume. 
Pairing
Pair One Phone
1. 
Press and hold the Multifunction button for 
about 5 seconds until indicator light flashes 
blue and red alternately, you hear “Power 
on” and pairing tone. Now headphone is in 
pairing mode.
2. 
Activate Bluetooth® on your phone and set it 
to search for new devices. 
3. 
Select “iSport Wireless Superslim”. If your phone 
asks, enter 0000 (four zeros) for the passcode 
or accept the connection. The indicator light 
stops flashing red and blue once successfully 
paired, you hear “Paired, phone 1 connected”. 
Some phone list an option to “Play through 
earphone”, select to use the headphone.
Note: When you unbox the headphone and power 
it on for the first time, it will enter to pairing mode 
automatically.
1
2
6
3
4
5
ENGLISH
ENGLISH