Mitel PAP2T User Manual

8

When entering values, such as an IP address, you may exit without saving your changes by press the * (star) key 
twice within half a second. Otherwise, the * (star) key will be treated as a decimal point or dot.

After entering a value, such as an IP address, press the # (pound) key to indicate you have finished your selection. 
To save the new setting, press the 1 key. To review the new setting, press the 2 key. To re-enter the new setting, 
press the 3 key. To cancel your entry and return to the main menu, press the * (star) key.

For example, to enter the IP address 191.168.1.105 using your telephone’s keypad, press: 191*168*1*105. 
When you are finished, press the # (pound) key, then press the 1 key to save the IP address. To cancel your entry 
and return to the main menu, press the * (star) key.

If the menu is inactive for more than one minute, the Phone Adapter will automatically exit the Interactive Voice 
Response Menu. To re-enter the menu, press the * (star) key four times.

The settings you have saved will take effect when you hang up the telephone. The Phone Adapter may reboot at 
this time.

Enter Interactive Voice 
Response Menu

—

Use this command to enter the 
Interactive Voice Response Menu. 
Do not press any other keys until you 
hear, “Configuration menu. Please 
enter option followed by the # (pound) 
key or hang up to exit.”

Check DHCP

—

Use this command to find out if DHCP 
has been enabled or disabled. If it is 
enabled, the Phone Adapter will be 
assigned an IP address automatically 
by your network router or gateway. 
If it is disabled, then the Phone 
Adapter will need to use a static
IP address.

VoIPon     www.voipon.co.uk      sales@voipon.co.uk      Tel: +44 (0)1245 808195      Fax: +44 (0)1245 600030