Miranda Camera Co Computer Monitor KALEIDO-K2 User Manual

18  |  Kaleido K2 

 

 

 

 
 
 
4.4.10 HD-SDI Video Input Module (MWI-HD) 
 
This module provides three standard- and high-definition digital video inputs.  The HD/SDI video input module 
accepts 4:2:2 standard definition serial digital video signal in either 525 or 625-line format, conform to the SMPTE 
259M-C standard and high-definition serial digital video signal conform to the SMPTE-292M-1998 standard. 
 
Make sure the input 4:2:2 cable has a maximum length of 100 m (325’), and that all serial digital video connections 
are point-to-point. For instance, there must be a point-to-point connection between the 4:2:2 IN BNC and the 
source equipment. If a T-connector is used to connect other equipment, the maximum specified cable length is no 
longer valid. 
 
 

 
Figure 4.4.10.1  MWI-HD rear connector panel 
 
 
4.4.11  Output Module (MWO-HR) 
 
This module provides all of the outputs from the Kaleido system. Connectors on the associated MWR-HR rear 
connector panel (1) are described below. 
 

 

 

 
 
RGBVH OUT: 

Analog progressive scan component video output (DE-15P connector) 

Connector pinout is shown on figure 4.4.8.2. 

 
DVI/RGBVH OUT: 

Digital progressive scan component output (DVI digital connector), with resolution from 
800 x 600 to 1600 x 1200 pixels. Note that in 1600 x 1200 the refresh rate is limited to 50 
or 59.94 Hz. 

 
AUDIO OUT: 

An 8-pin terminal connector is provided to monitor one stereo audio channel, in both 
balanced AES3 and analog formats. Refer to figure 4.4.11.2 for connector pinout.