Minicom Advanced Systems SMARTRACK 116 IP User Manual
USER GUIDE
12
Figure 11 Removing the six screws
2. Take the rear bracket out, see below.
Figure 12 Taking the rear bracket out
3. Insert the long bracket into the rail then adjust the bracket to fit your cabinet.
Tighten at least 2~3 screws along the length you need. See Figure 13.
Figure 13 Inserting and tightening the long bracket
4. Repeat the above steps for the other side.
5. Go to section
6 Connecting to a rack.
6.2 Connecting the KVM Switch 116 IP
1. Connect the bracket A to the sides of the Switch using the two 6mm screws
provided see figure below.