MINOLTA CF910 Maintenance Manual
6-4
2. When the Message “Please add Toner.” Appears
Wh
en
a Mes
sage
App
ear
s
Chapter 6
Remove the bottle cap and peel off the seal.
Open the Toner Hopper Lid.
NOTE
Make absolutely certain that the color of the
toner matches the color of the Toner Hopper Lid.
Make absolutely certain that the color of the
toner matches the color of the Toner Hopper Lid.
Align the tab on the Bottle with the cutout
on the Toner Receptacle and turn the Bottle
clockwise until it stops.
on the Toner Receptacle and turn the Bottle
clockwise until it stops.
Wait until the toner stops falling in (approx.
60 seconds), then tap the Bottle a few times
to ensure that all the toner falls into the
Hopper.
60 seconds), then tap the Bottle a few times
to ensure that all the toner falls into the
Hopper.
Making sure that the toner has emptied
completely, turn the Bottle counterclockwise
and lift it out from the Receptacle. Close the
Toner Hopper Lid.
completely, turn the Bottle counterclockwise
and lift it out from the Receptacle. Close the
Toner Hopper Lid.
NOTE
Please wait for a while after the toner has fallen
in completely. If not, toner powder may be blown
up from the Toner Hopper.
Please wait for a while after the toner has fallen
in completely. If not, toner powder may be blown
up from the Toner Hopper.
Slide the Toner Hopper Unit back in and
close the Front Door.
close the Front Door.
Use the same procedure to add toner for the
other three Main Hoppers.
other three Main Hoppers.
5
1144L016AA
6
1144L014AA
7
1144L017AA
8
1144L018AA
9
1144L019AA
10
1144L020AA
11