Microsoft Advantech UNO-3074 User Manual
41
Chapter 3
3.3 Installing a Hard Disk
The procedure for installing a hard disk into the UNO-3074 is listed
below. Please follow these steps carefully.
1.
below. Please follow these steps carefully.
1.
Remove the power cord.
2.
Unscrew the eight screws from the upper cover (as shown below)
3.
Unscrew the HDD bracket from the upper cover.
4.
Install the HDD in HDD bracket and secure with the four screws,
and then fix the HDD bracket on the upper cover.
Please refer to pictures below.
and then fix the HDD bracket on the upper cover.
Please refer to pictures below.
Note:
When connecting IDE cable for 2.5” HDD in the
accessories bag (refer to section 1.5) to the
HDD, pay attention to the direction of IDE cable.
The correct way is shown by the first figure below
(notice the pink line).
accessories bag (refer to section 1.5) to the
HDD, pay attention to the direction of IDE cable.
The correct way is shown by the first figure below
(notice the pink line).