Microsoft ES4612 User Manual
Configuring the Switch
3-84
3
Statically Configuring a Trunk
Command Usage
• When configuring static trunks, you may not be
• When configuring static trunks, you may not be
able to link switches of different types,
depending on the manufacturer’s
implementation. However, note that the static
trunks on this switch are Cisco EtherChannel
compatible.
depending on the manufacturer’s
implementation. However, note that the static
trunks on this switch are Cisco EtherChannel
compatible.
• To avoid creating a loop in the network, be sure
you add a static trunk via the configuration
interface before connecting the ports, and also
disconnect the ports before removing a static
trunk via the configuration interface.
interface before connecting the ports, and also
disconnect the ports before removing a static
trunk via the configuration interface.
Web – Click Trunk, Trunk Membership. Enter a trunk ID of 1-6 in the Trunk field,
select any of the switch ports from the scroll-down port list, and click Add. After you
have completed adding ports to the member list, click Apply.
select any of the switch ports from the scroll-down port list, and click Add. After you
have completed adding ports to the member list, click Apply.
Figure 3-50 Static Trunk Configuration
active
links
links
}
statically
configured
configured