Microsoft ES4612 User Manual

Command Line Interface

4-30

4

• You can delete an address range just by specifying the start address, or by 

specifying both the start address and end address. 

Example
This example restricts management access to the indicated addresses.

This command displays the client IP addresses that are allowed management 
access to the switch through various protocols.

show management {all-client | http-client | snmp-client | telnet-client}

• all-client - Adds IP address(es) to the SNMP, web and Telnet groups.
• http-client - Adds IP address(es) to the web group.
• snmp-client - Adds IP address(es) to the SNMP group.
• telnet-client - Adds IP address(es) to the Telnet group.

Global Configuration

Console(config)#management all-client 192.168.1.19
Console(config)#management all-client 192.168.1.25 192.168.1.30
Console#

Console#show management all-client
Management Ip Filter
 Http-Client:
   Start ip address      End ip address
-----------------------------------------------
1. 192.168.1.19          192.168.1.19
2. 192.168.1.25          192.168.1.30

 Snmp-Client:
   Start ip address      End ip address
-----------------------------------------------
1. 192.168.1.19          192.168.1.19
2. 192.168.1.25          192.168.1.30

 Telnet-Client:
   Start ip address      End ip address
-----------------------------------------------
1. 192.168.1.19          192.168.1.19
2. 192.168.1.25          192.168.1.30

Console#