Microsoft ES4612 User Manual
Priority Commands
4-213
4
Example
Priority Commands (Layer 3 and 4)
map ip port (Global Configuration)
Use this command to enable IP port mapping (i.e., class of service mapping for
TCP/UDP sockets). Use the no form to disable IP port mapping.
TCP/UDP sockets). Use the no form to disable IP port mapping.
Syntax
[no] map ip port
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
The precedence for priority mapping is IP Port, IP Precedence or IP DSCP,
and default switchport priority.
and default switchport priority.
Console#show queue cos-map ethernet 1/1
Information of Eth 1/1
CoS Value : 0 1 2 3 4 5 6 7
Priority Queue: 2 0 1 3 4 5 6 7
Console#
Information of Eth 1/1
CoS Value : 0 1 2 3 4 5 6 7
Priority Queue: 2 0 1 3 4 5 6 7
Console#
Table 4-66 Priority Commands (Layer 3 and 4)
Command
Function
Mode Page
map ip port
Enables TCP/UDP class of service mapping
GC
map ip port
Maps TCP/UDP socket to a class of service
IC
map ip precedence
Enables IP precedence class of service mapping
GC
map ip precedence
Maps IP precedence value to a class of service
IC
map ip dscp
Enables IP DSCP class of service mapping
GC
map ip dscp
Maps IP DSCP value to a class of service
IC
map access-list ip
Sets the CoS value and corresponding output queue for
packets matching an ACL rule
IC
map access-list mac
Sets the CoS value and corresponding output queue for
packets matching an ACL rule
IC
show map ip port
Shows the IP port map
PE
show map ip precedence Shows the IP precedence map
PE
show map ip dscp
Shows the IP DSCP map
PE
show map access-list ip
Shows CoS value mapped to an access list for an interface
PE
show map access-list mac Shows CoS value mapped to an access list for an interface
PE