Midland Radio BT2 User Manual

Page of 23
15
E
n
g
li
s
h
Disabling the VOX feature
Disable the VOX feature, as explained in the previous section, 
to make sure that the intercom will not automatically be acti-
vated when you speak on the GMRS. To enable the Intercom 
feature when using this configuration, you will have to press 
Intercom button manually. (This operation disables radio com-
munications  that  will  be  automatically  re-enabled  when  the 
Intercom feature is disabled).
Attention:  if  you  disable  the  VOX  feature,  you  will  only 
be able to answer incoming phone calls by pressing the 
“Phone” button.
Permanently enabling 3-way communications
If you enable this feature (as explained in the previous sec-
tion), every time you talk the Intercom is enabled, but the two-
way radio transceiver communications are not disabled. This 
means  that  you  can  share  two-way  radio  communications 
between Rider and Passenger.
Share the music between Rider and Passenger
If you wish to share the same music between the Rider and 
the Passenger you must follow these simple steps:
›   Connect the music player to the Rider or Passenger unit, 
via wired connection trough the AUX plug
›   Enable the “3 way communications feature” (see the chap-
ter  above)  on  the  unit  which  has  the  music  player  con-
nected
›   Activate the Intercom, now the music is shared.
Attention:  Only  those  who  are  connected  to  music  by 
wire can listen to it in stereo mode.
Attention: It is not possible to share music if the source 
is Bluetooth Stereo Player (A2DP)