Micro Innovations M000174-19 User Manual

48  

M000174-19 

-port n 

Set port number to n, values between 1000 and 65535 are permissible (the 
default port number is set to 51738). 

-c 

Closes an «open» connection between server and client. The call only has a 
function if the call is executed on the device on which the server is already 
running. 

-exit 

Exits the remote server. This call only has a function if the remote server is 
already running. 

-i «File» 

Defines the path to the INI file in which the password settings are saved. If the 
password protection is activated without the /i parameter, an INI file 
«CeRemoteSvr.ini» is created in the directory «\Storagecard\os». The INI file 
only contains encrypted data. 

-h 

Minimizes the server dialog immediately to the status bar when the server is 
started (dialog not visible). 

-? 

Displays information on the available command line parameters. 

 
•  The program «CERemoteSvr.exe» can also be started via the «Autoexec.bat» file.  
•  A connection between the server and client can be disconnected as follows: 

 - Touch the «Disconnect» button on the server dialog  
 - The server is closed  
 - Command line call of the server with parameter -c 

 

Note: 
For performance reasons, the server/client connection should not be permanently active. The active 
server only slightly loads the performance of the device. However, an active client connection slows 
down the system considerably in certain circumstances. The server only supports one client 
connection at a time. 

 

 The following dialog is used to modify the password settings. 

 

 

 

The password settings are stored in the file «CERemoteSvr.ini» in the directory «\“Bootdevice”\os\». 
The data stored is naturally encrypted. The file is stored on the Flash card, which means that the 
password settings are also retained after a restart.