Metabo TDP 7500 S User Manual
11
ENGLISH
Ensure there is a sufficient water
supply.
Make sure the float switch can
move unrestricted.
Motor hums but does not start:
x
Pump blocked by foreign object.
Clean pump.
Clean pump.
Pump does not pump properly:
x
Delivery head too high.
Observe max. delivery head (see
Observe max. delivery head (see
"Technical Specifications").
x
Discharge hose kinked.
Straighten discharge hose.
Straighten discharge hose.
x
Discharge hose leaky.
Seal discharge hose, tighten
Seal discharge hose, tighten
screw fittings.
Pump runs very noisy:
x
Pump primes air.
Ensure there is a sufficient water
Ensure there is a sufficient water
supply.
Adjust float switch correctly.
Hold pump at an angle when sub-
Hold pump at an angle when sub-
merging.
Pump runs continuously:
x
Float switch does not reach lower
position.
Make sure the float switch can
position.
Make sure the float switch can
move unrestricted.
A
Danger!
Repairs to electric tools must
Repairs to electric tools must
only be carried out by a qualified
electrician!
electrician!
Electric tools in need of repair can be
sent to an authorised service center in
your country. See spare parts list for
address.
sent to an authorised service center in
your country. See spare parts list for
address.
Please attach a description of the fault to
the electric tool.
the electric tool.
The packaging of the pump can be
100 % recycled.
100 % recycled.
Worn out power tools and accessories
contain considerable amounts of valua-
ble raw and plastic materials, which can
be recycled.
contain considerable amounts of valua-
ble raw and plastic materials, which can
be recycled.
These instructions are printed on chlo-
rine-free bleached paper.
rine-free bleached paper.
9.
Repairs
10. Environmental Protection
11. Technical Specifications
Mains voltage
V 230
a 1
Frequency
Hz 50
Rated output
W 1000
Rated current
A 4.4
Fuse protection min. (time-lag or L-type circuit breaker)
A
10
Running capacitor
PF 12.5
Rated speed
min
-1
2800
Pump capacity max.
l/h
7500
Delivery head max.
m 36
Delivery pressure max.
bar
3.6
Immersion depth max.
m
10
Standing water max.
mm
30
Temperature of the primed medium max.
°C
35
Degree of protection
IP 68
Protection class
I
Insulation class
B
Materials
Pump casing
Pump shaft
Impeller
Pump shaft
Impeller
Polypropylene
Stainless steel
Noryl
Power cable (HO 7 RN-F)
m
15
Discharge port (AG=male, IG=female)
1" IG
Dimensions (pump casing)
Height
Diameter
Diameter
mm
mm
mm
470
150
150
Weight
kg 8.2
Max. length of extension cable
at 3 x 1.0 mm
2
lead cross-section
at 3 x 1,5 mm
2
lead cross-section
m
m
m
30
50
50