Measurement Specialties 9116 User Manual

Pressure Systems, Inc.                                                                                        Model 9116 User’s Manual 
 
 

 

Page 116 

 

www.PressureSystems.com 

Solenoid Valve O-Ring Replacement 

 
Following is a step-by-step procedure to replace the internal solenoid valve O-rings in a Model 
9116 Intelligent Pressure Scanner.  The module contains two internal solenoid valves. 
 
(1)  Disassemble the module as described in Section 5.1.2. 
 
(2)   Remove the solenoid valve by 
 

 unscrewing the two (2) Phillips-head  

 

 screws on top of the solenoid.  Gently  

 

 lift it out of the module. Be careful not  

 

 to crimp the attached nylon tubing. 

 
(3)  Remove and replace the O-rings 

needing maintenance using the 
procedure described in Section 
5.1.6.1. 

 
(4)  Replace the solenoid valve and  

gently tighten the screws.  

 
(5)  Reassemble the module.  
 
(6)  Test your scanner to ensure proper operation.