McIntosh MVP891 User Manual

button to select the CD Layer (or Multi Layer/Stereo

Layer). Press the PLAY Push-button, after the disc

tray closes the MVP891 will read the selected layer

and the disc starts to play. Refer to figures 30, 32 and

33.

Note: The next SACD disc played will default to the

SACD Multichannel layer or the SACD Stereo

layer if a Multichannel layer is not present on the

disc.

How to Play a CD Disc

With a disc already loaded into the MVP891, press

the (Play) Push-button on the Front Panel of the

MVP891 or Remote Control. Refer to figures 30 and

32.

How to Pause a Disc

This feature allows the temporary stopping of disc

playback. Refer to figures 30, 32 and 33.

1. When playing a Disc, press the ; (Pause) Push-

button to temporarily stop playback.

Note: After the Pause Feature is activated, with a

DVD-Video Disc in the MVP891, each ad-

ditional press of the

;

(Pause) Push-button

will permit the video to advance one frame at a

time.

2. Press the (Play) Push-button to cancel pause

and resume playing the disc.

DVD-Video Rapid Frame Advance

The MVP891 allows for rapid scanning of Blu-ray and

DVD Video Frames both forward or backward direc-

tions at different speeds.

1. When a disc is playing,

press the; (Pause)

Push-button to stop

playback.

read the increase in disc data before playback

will occur.

How to Play a BD or DVD Disc

With a disc already loaded into the MVP891, press

the (Play) Push-button on the Front Panel of the

MVP891 or the Remote Control. Refer to figures 30

and 32.

Notes: 1. When a Blu-ray, DVD Video or Audio Disc

is first started, the Disc’s On-Screen Menu

will usually appear allowing for the choice of

selections and various Audio/Video Playback

Parameters.

2. When the MVP891 is connected to a HDTV not

compatible with Blu-ray 3D Discs, an error

message will appear On-Screen.

How to Play a SACD Disc

With a disc already loaded into the MVP891, press

the (Play) Push-button on the Front Panel of the

MVP891 or Remote Control. The Disc will start

playing the first selection of the SACD Layer; this

could be either the Multichannel or 2-Channel Tracks

depending on the disc contents. By pressing the DISC

LAYER Push-button once, the Front Panel Informa-

tion Display will momentarily display the current

layer playing.

To change from the Multichannel Layer to the

SACD 2-Channel while the disc is playing, press the

DISC LAYER Push-button once to display the cur-

rent layer “MULTI” and then press the DISC LAYER

Push-button a second time to select the “STEREO”

Layer.

To change from the Multichannel or Stereo Layer

to the CD Layer (or back again), first stop the disc

from playing. Press the OPEN/CLOSE Push-button to

open the tray and then press the DISC LAYER push-

Figure 32

HOME

How to Operate the MVP891

2. Press the

(Fast For-

ward) or

(Reverse)

Push-button to activate

the Rapid Frame Advance.

Note: If the Fast Forward

or Reverse Push-but-

ton is pressed sev-

eral times, the speed

of the Frame Ad-

vance will increase.

An On-Screen Icon

will appear during

the Rapid Frame

Advance Mode indi-

cating the advanced

speed.

3. To cancel the Rapid Frame

Advance Feature press the

(Play) Push-button.

Back Track/Chapter

Return back to the beginning

of the Track/Chapter currently

playing by momentarily press-

ing the 9 (Back) Push-button

on the MVP891. Repeated

momentary presses of the
9

(Back) Push-button will

allow for rapid selection of

the desired previous Tracks/

Chapters.

Figure 33