McDATA OPENconnectors Command Line Interace User Manual
2
CLI Commands
2-10
FRQILJSRUWQDPH
6\QWD[
name portNumber “portName”
3XUSRVH
This command sets the name for a port.
3DUDPHWHUV
This command has two required parameters.
&RPPDQG([DPSOH
Root> config port name 4 “Sam’s tape drive”
portNumber
Specifies the port number. Valid values are:
0–15 for the Sphereon 3016 and 3216
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–63 for the Intrepid 6064
0–127 and 132–144 for the Intrepid 6140
0–15 for the Sphereon 3016 and 3216
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–63 for the Intrepid 6064
0–127 and 132–144 for the Intrepid 6140
portName
Specifies the name for the port. The port name
must not exceed 24 characters in length.
must not exceed 24 characters in length.