McDATA OPENconnectors Command Line Interace User Manual
CLI Commands
config
2
2-13
FRQILJSRUWVKRZ
6\QWD[
show portNumber
3XUSRVH
This command displays the port configuration for a single port.
'HVFULSWLRQ
This show command, on the config.port branch, displays the current
configuration for the specified port.
configuration for the specified port.
3DUDPHWHUV
This command has one parameter.
&RPPDQG([DPSOH
Root> config port show 4
2XWSXW
The port configuration is displayed as a table that includes the
following properties.
following properties.
portNumber
Specifies the port number. Valid values are:
0–15 for the Sphereon 3016 and 3216
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–63 for the Intrepid 6064
0–127 and 132–144 for the Intrepid 6140
0–15 for the Sphereon 3016 and 3216
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–63 for the Intrepid 6064
0–127 and 132–144 for the Intrepid 6140
Port Number
The port number.
Name
The port name.
Blocked
The blocked state. Valid values are true and
false.
false.
Extended
Distance
Distance
The extended distance configuration state. Valid
values are true and false. (This field is not valid
on the Sphereon 4500.)
values are true and false. (This field is not valid
on the Sphereon 4500.)
FAN
The fabric address notification (FAN) state.
Valid values are true and false. (Sphereon 4500
only.)
Valid values are true and false. (Sphereon 4500
only.)