Marantz SR4200 User Manual

13

The station name preset function allows the name of each preset
channel to be entered using alphanumeric characters.  The Station
Name button is valid only in the tuner mode.  Before station name
preset operation, store stations with the preset memory operation.

Press the 

button 

!2

 on the front panel or 

 button

⁄6

 on the remote for more than 3 seconds.

The left most column of the station name indicator flashes,
indicating the character entry ready status.

When you press the 

   or   buttons 

!3

 is

turned, alphabetic and numeric characters will be displayed in the
following order:

→ B → C ...Z  → 1 → 2 → 3..... 0  → – → + → / → (Blank) → A

→

← DOWN

After selecting the first character to be entered, press the

button 

!2

. The entry in this column is fixed and the next

column starts to flash.  Fill the next column and press the

button 

!2

 for more than 3 seconds to confirm the entry.

First, press the 

button 

c

 on the remote control unit.

 (This operation is not necessary if the remote control unit has
already been operated in the TUNER mode.)

Enter the character using the ten keypad 

.

.  For example, to

enter “

”:

1) Press the “

” button.  “

” appears on the display column.

2) Every time the 1  button is pressed, the displayed character
changes in the order: 

→ B → C → 1 → A...

Pressing buttons other than the “1” button cause different
characters to be displayed in a similar way, so that other
alphanumeric characters can be entered.  To enter a blank or
space, press the “9” button.

When the desired character is displayed, press the 

 button

⁄6

 to confirm the entry in this column and move to the next

column.  After having filled all of the 8 columns, press the 

button 

⁄6

, for more than 3 seconds to confirm the entry.

Press the 

button 

⁄2

 in the TUNER MODE on the

remote controller.

Front display will show “

”.

Input your desired frequency with ten key pad button on the
remote.

Press the 

button 

q

 / 

x

.

Press the 

 button 

t

 on the front panel or

press the 

 button 

c

 on the remote unit to select an

input source.

Turn the 

 knob 

e

 on the front

panel or Surround mode buttons 

.

 in the AMP MODE on the

remote unit to select the desired surround mode.

Adjust the volume level using the 

knob 

r

 on the front

panel or press the 

 button 

v

 on the remote.  If

necessary, adjust the tone, press the 

, 

 

⁄4

and 

, 

  

⁄5

  on the remote unit.

• In case of remote control operation, press one of the function

buttons twice within 2 seconds to select the function.

• Tone control is not effective for SOURCE DIRECT and 96kHz

PCM input.

Select one of the following video sources
 TV, DVD, VCR1 or DSS/VCR2.

Next, select one of the following audio sources
FM, AM, CD, TAPE, or CDR/MD.

Set the sleep timer while the power is turned on.

Turn the power ON and press the 

button 

i

 / 

¤3

.

Press the 

button 

i

 / 

¤3

 the number of times to set the

desired sleep time in minutes.
Each press of the 

button 

i

 / 

¤3

 or changes the display in

the following order:

The unit will shut off in the number of minutes indicated.

* While the sleep timer is activated, the remaining time can be

displayed for approximately 2 seconds by pressing the 

button 

i

 / 

¤3

.

* To cancel the sleep timer, press the 

button 

i

 / 

¤3

 and then

press the 

button 

!1

 / 

⁄7

.

10

20

30

40

50

OFF

90

80

70

60