Makita DPC7310 User Manual

22

Over time, the inside of the protective hood can become caked 

with  material  residue  (especially  from  wet  cutting),  which  if 

allowed to accumulate can hinder the free rotation of the cut-

ting disc. For this reason the hood must be cleaned out from 

time to time.
Take off the cutting wheel with spring washer and remove the 

accumulated material from inside the hood with a strip of wood 

or similar implement.
Clean the shaft and all removed parts.

NOTE: To install the cutting wheel see ”Mounting the cutting 

Turn the cover lock (11) to the ”Unlocked       ” position and 

carefully remove the filter cover (12).
There are two O-rings (15) between the filter cover (12) and 

the air filter hood (14).

Remove screws (13) and take off the cover (14).
Clean the O-ring (15) with a brush and inspect for damage.

Take the pre-filter (foam, 17) out of the filter cover.
Pull the air filter insert (paper cartridge, 18) out of the cover.
Remove the inner filter (16) from the intake opening.

Note:
Do not allow dirt to get into the carburetor!
Switch the combination switch to ”Choke” or cover the carbure-

tor with a clean cloth.