Magellan Vantage Point PC Application Software 605-0183-004 A User Manual
8. A ‘Save Route’ Window opens. Add any comments, media you want and lastly give
the route a name that you can identify later when you want to active the route.
9. Move the cursor again to the Route window and click ‘Close’.
10. Double click on the displayed route to bring up information (Distance, stops, etc.) for
10. Double click on the displayed route to bring up information (Distance, stops, etc.) for
the route.
Create a Geocache
A GPS receiver and a hunger for adventure are all you need for a high-tech treasure hunt.
Use your VantagePoint application software to create a "cache" or treasure hunt. Then
store the geocache information in your MyGPS folder of your PC. To create a geocache
with VantagePoint, use the following instructions:
Use your VantagePoint application software to create a "cache" or treasure hunt. Then
store the geocache information in your MyGPS folder of your PC. To create a geocache
with VantagePoint, use the following instructions:
1. Use the Map Manipulator to zoom in and display the place on the map you want to
add a waypoint.
2. In the Toolbar, expand the Map Tools.
3. Select the Push Pin Icon and select
3. Select the Push Pin Icon and select
‘Geocache’ from the drop-down menu.
4. Move the square ‘Place Geocache’ cursor
to the position on the map that you want to
place it.
place it.
5. Click once and the ‘New
Geocache’ window is
displayed.
displayed.
6. This process was just like
creating a waypoint until now.
Notice how much more
information can be stored in
the ‘New Geocache’ window.
Notice how much more
information can be stored in
the ‘New Geocache’ window.
Geocaches can then be transferred
to your GPS receiver. Once
installed in your receiver, they can
also be uploaded to the web at
www.geocaching.com as a .gpx file.
to your GPS receiver. Once
installed in your receiver, they can
also be uploaded to the web at
www.geocaching.com as a .gpx file.
VantagePoint Software Update
To update VantagePoint software follow the instructions below:
1.Click on Connect tab in VantagePoint.
2.Click on the (Update tool).
3.Select on VantagePoint Update.
4.If there is a software version update available, you will get an automatic update.
5.If you already have the current software version, you will see: