M-AUDIO PROFIRE 2626 User Manual
User Guide
34
ProFire 2626
Scenario 1: ProFire 2626 as Clock Master
By selecting “internal” as the sync source in the Control Panel, you designate ProFire 2626 as the clock master You will
then need to select “external” (or “slave” on certain devices) mode on each of your other digital devices (this is usually an
internal menu setting on that device)
then need to select “external” (or “slave” on certain devices) mode on each of your other digital devices (this is usually an
internal menu setting on that device)
In Figure 1 below, digital multi-track recorders with ADAT optical outputs are connected to optical ports A and B of the
ProFire 2626, and a DAT machine is connected to the coaxial S/PDIF I/O ProFire 2626 is selected as the master, and all
of the other devices are set to “external” (or “slave”)
ProFire 2626, and a DAT machine is connected to the coaxial S/PDIF I/O ProFire 2626 is selected as the master, and all
of the other devices are set to “external” (or “slave”)
12V DC
MIDI
S/PDIF
Word Clock
In A
Out A
7
5
3
8
7
6
5
4
3
2
1
In B
Out B
Optical
Line Outputs
3.5A
+
—
Mic/Line Inputs
1
8
6
4
2
MIDI
S/PDIF
Word Clock
Out A
Out B
In A
In B
S/PDIF
(RCA)
Slave (ADAT A)
Slave (DAT)
Slave (ADAT B)
Master