Lynx Computer Accessories R FR 5010 User Manual

 

 

Page 29  

 

 

5101 rack frame may (due to the small airflow gap) 
restrict the flow of air to this piece of equipment. 

Also do not place equipment or objects on top of 

the R FR 5010 rack frame that could restrict airflow 
from the top of the rack. This may cause 

malfunction and damage due to excessive heat 

buildup. 
 

Mechanical Installation 

The R FR 5010 / R FR 5011 is secured into a standard 

19-inch rack using 4 standard rack screws. Remove 
front cover panel for installation, which allows 

access to the rack ears (figure 3 shows location). 
Rear support of the rack using rack rails is 

recommended but not necessary.  

 

Front Panel Removal R FR 5010 

The front panel is removed by simply rotating the 
thumbscrews one turn counterclockwise and 

pulling the panel outwards.  

 
 

Front Panel Removal R FR 5011 

The front panel is removed by simply rotating the 
thumbscrews one turn counterclockwise and 

pulling the panel outwards.  

If you put back the Fan Front Cover of the R FR 5011 
please make sure that the 9 Pin Sub D connector 

is connected correctly (see pictures below)