Lorex Technology SG19LD800 Series User Guide
59
Network Connectivity Overview
Network Connectivity Overview
The Observation System can be remotely controlled using your existing network and the provided
software.
software.
1. Connect the Observation System to the Router using the supplied Ethernet Cable. Power the
Observation System on.
NOTE: The Observation System must be connected to the router prior to powering on the
system. This allows the system to communicate on your network
system. This allows the system to communicate on your network
2. Find the IP address of your Observation System through the Menu System on the unit. See
page 39 for details
3. Set up a web account at
. Refer to pages 61-62 for setup and
configuration instructions.
4. Enable PORT FORWARDING on your Router. Refer to the instructions on Page 63 for details.
5. Install the Software on your PC. See the Software Installation Guide (provided with this System)
for installation requirements and details on using the software.
OBSERVATION SYSTEM
ROUTER
(Not Included)
PC
(Not Included)
INTERNET