Lorex Technology LOREX Technology VCR SG-7960 User Manual

Alarm recording is performed when there is an input (trigger) at the ALARM
IN terminal “      “ is displayed on the display panel.

1  Make all necessary connections.

2  Press the MENU, SHIFT

, SHIFT

buttons in sequence to display

the REC MODE SET menu.

3  Press the SHIFT

button until the arrow mark (

) points to ALARM

REC SET.

4  Press the SHIFT

button to display the ALARM REC SET menu.

5  Press the SHIFT

button to select “YES” or “NO”.

• YES

The alarm recording takes place when there is alarm trigger
input

• NO

The alarm recording does not take place

6  Press the SHIFT

button to set the Alarm speed.

7  Press the SHIFT

button to select the desired recording speed.

• 2H

2-hour mode recording

• 6H

12-hour mode recording

• 18H 

24-hour mode recording

8  Press the SHIFT

button to set the alarm duration

9   Press the SHIFT

button to select the desired recording duration.

• Auto : Records as long as the alarm signal is being input. (Minimum 2

minutes is recorded.)

• 3/5/10/15/20/25/30 MIN : Recording for the set duration. (MIN : minute)

• T.END : Records until the tape end is reached when there is alarm 

trigger input.

19

960-Hour Time Lapse Video Cassette Recorder

960-Hour Time Lapse Video Cassette Recorder

20

✔

• During alarm

recording all buttons
are disabled except
the STOP button. If
the STOP button is
pressed, the alarm
recording will stop.

• If an alarm trigger is

received while
alarm recording is in
progress, the
recording duration
for the second
alarm will be calcu-
lated from that
point.

• When there is a

power loss during
alarm recording, if
the power is
restored within the
recording set 
duration, alarm
recording will 
continue.

✔

• Alarm Counter Reset

can be performed by
pressing the CLEAR
key in “AlarmTime” of
Initial Menu screen.

During alarm recording, “       “ will be flashing on the display panel. 

The maximum display number of alarm triggers is “35”, at the next
alarm recording the counter will indicate “00”.