Lucent Technologies Definity Enterprise Communication Server 8.2 User Manual

Issue 1

April 2000

Managing trunks 

349

Adding a Tie or Access trunk group 

Before you can administer any trunk group, you must have one or more circuit 
packs of the correct type with enough open ports to handle the number of trunks 
you need to add. To find out what circuit packs you need, refer to the DEFINITY 
ECS System Description.

As an example, let’s add a two-way tie trunk group that supports voice and 
voice-grade data.

To add the new tie trunk-group:

1. Type 

 and press 

RETURN

.

The 

Trunk Group

 screen appears. The system assigns the next available 

trunk group number to this group. In our example, we’re adding trunk 
group 5.

2. In the Group Type field, type 

.

This field specifies the kind of trunk group you’re creating.

 

Page 1 of X

                                 TRUNK GROUP

 Group Number: 5__

Group Type: tie           CDR Reports: y

   Group Name: Outside calls

COR: 85_ 

TN: 1__      TAC: 105_

    Direction: two-way_       Outgoing Display? n    Trunk Signaling Type: ____
  Dial Access? n                Busy Threshold: 99_         Night Service: 1234
 Queue Length: 0__                                   Incoming Destination: ____
    Comm Type: voice                 Auth Code? n

Trunk Flash? n

BCC: 0

 TRUNK PARAMETERS
    Trunk Type (in/out): wink/wink___     Incoming Rotary Timeout(sec): 5_
     Outgoing Dial Type: tone_____                

Incoming Dial Type: tone____

                                               Disconnect Timing(msec): 500_
        Digit Treatment: __________                             Digits: ____

Expected Digits:__

Sig Bit Inversion: none

Analog Loss Group: ___ 

Digital Loss Group: ___

Incoming Dial Tone? y

  Disconnect Supervision - In? y  Out? n
   Answer Supervision Timeout: 0__           Receive Answer Supervision? y